INNPM11
ABB
T/T
1 year
Availability: | |
---|---|
Quantity: | |
INNIS01:
Memory:
208 kbytes RAM
64 kbytes ROM
Power Requirements:
+5 VDC at 900 mA; 4.50 W nominal
+15 VDC at 5 mA; 0.08 W nominal
-15 VDC at 200 mA; 3.00 W nominal
System Capability:
62,500 nodes in the system
250 nodes on a loop
Interfaces: PCU, MCS, OIS, ICI
Communication Rates:
10 Mbaud or 2 Mbaud
Mounting:
Occupies one slot in standard INFI 90 OPEN module mounting unit
INNPM11:
Memory:
512 kbytes RAM
256 kbytes ROM
Power Requirements:
+5 VDC at 2 A; 10 W nominal
Communication Rates:
1 Mbaud (Controlway)
83.3 kbaud (module bus)
Mounting:
Occupies one slot in standard INFI 90 OPEN module mounting unit
All INFI-NET Communication Modules:
Electromagnetic/Radio Frequency Interference:
Values not available; recommends keeping cabinet doors closed and avoiding communication equipment closer than 2 meters from the cabinet.
Environmental Specifications:
5% to 90% up to 55°C (131°F) noncondensing
5% to 40% above 55°C (131°F) noncondensing
Ambient Temperature: 0° to 70°C (32° to 158°F)
Relative Humidity:
Atmospheric Pressure: Sea level to 3 km (1.86 mi.)
Air Quality: Noncorrosive
Certification: CSA certified for use as process control equipment in an ordinary (nonhazardous) environment; Factory Mutual approved for use in Class I, Division 2, hazardous locations
Description
The process control unit interface is made up of the INNIS01 Network Interface Slave Module (NIS) and INNPM11 Network Processing Module (NPM). Through this interface the process control unit has access to INFI-NET. At the same time the NPM module communicates with the control modules via the Controlway.
The process control unit interface can support hardware redundancy. In a redundant configuration, there are two NIS modules and two NPM modules. One pair of modules is the primary. If the primary modules fail, the backup modules come on-line. Redundant data highway communication capability is a standard feature.
The NIS module is an I/O module that works in conjunction with the NPM module. This allows a node to communicate with any other node on the INFI-NET loop. The NIS module is a single printed circuit board that occupies one slot in the module mounting unit. The circuit board contains microprocessor based communication circuitry that enables it to interface with the NPM module. Two latching screws on the faceplate secure the NIS module to the module mounting unit. There are 16 LEDs on the faceplate that display error codes and event/error counts.
More Products
ICSTriplex | GE Fanuc | Foxboro | Yokogawa |
T8444 | IC695RMX128 | FCM10E | AAI143-S03/A4S00 |
T8100C | DS200PCCAG5ACB | P0972VA ATS | AAI543 |
T8833C | DS200LDCCH1 DS200LDCCH1ALA | P0903CW | AAI543-H00 |
T8121C | IC693BEM340 | FBM215 | AAI543-H00 S1 |
TC20902 | IS200TRLYH1BED | FBM201 P0914SQ | AAI543-H00/K4A00 |
T8841 | IS2020RKPSG3A | BO123HE | AAI543-H03 |
T83124C | DS200DDTBG2ABB | P0972VA | AAI543-S00 |
T8153C | IC752WFC555-EC | FBM237 P0914XS | AAI543-S00 S1 |
TC32301 | 531X123PCHACG1 | FBI10E | AAI543-S00/A4S00 |
T8201 | DS200TCQAG1BGE | FBM242 P0916TA | AAI543-S03/A4S00 |
Service
Warranty: 12 months.
Lead time: 1-3 working days.
Type of payment:T/T and Western Union.
Courier partners: DHL, UPS, TNT, FedEx .
Technical specification, manuals and data sheets: Available on request.
FAQ
Q) What is your advantage?
A)Competitive Price Fast Delivery Thoughtful service.
Q) What about payment?
A)T/T, Western Union.
Q) What is the warranty?
A)The Process Automation warranty is 12 months from the date of shipment.
Q) What is the price?
A) The target pricing is to be competitive with the 3 rd party surplus market. The pricing is subject to change, and the percentage as compared to new varies by product.
INNIS01:
Memory:
208 kbytes RAM
64 kbytes ROM
Power Requirements:
+5 VDC at 900 mA; 4.50 W nominal
+15 VDC at 5 mA; 0.08 W nominal
-15 VDC at 200 mA; 3.00 W nominal
System Capability:
62,500 nodes in the system
250 nodes on a loop
Interfaces: PCU, MCS, OIS, ICI
Communication Rates:
10 Mbaud or 2 Mbaud
Mounting:
Occupies one slot in standard INFI 90 OPEN module mounting unit
INNPM11:
Memory:
512 kbytes RAM
256 kbytes ROM
Power Requirements:
+5 VDC at 2 A; 10 W nominal
Communication Rates:
1 Mbaud (Controlway)
83.3 kbaud (module bus)
Mounting:
Occupies one slot in standard INFI 90 OPEN module mounting unit
All INFI-NET Communication Modules:
Electromagnetic/Radio Frequency Interference:
Values not available; recommends keeping cabinet doors closed and avoiding communication equipment closer than 2 meters from the cabinet.
Environmental Specifications:
5% to 90% up to 55°C (131°F) noncondensing
5% to 40% above 55°C (131°F) noncondensing
Ambient Temperature: 0° to 70°C (32° to 158°F)
Relative Humidity:
Atmospheric Pressure: Sea level to 3 km (1.86 mi.)
Air Quality: Noncorrosive
Certification: CSA certified for use as process control equipment in an ordinary (nonhazardous) environment; Factory Mutual approved for use in Class I, Division 2, hazardous locations
Description
The process control unit interface is made up of the INNIS01 Network Interface Slave Module (NIS) and INNPM11 Network Processing Module (NPM). Through this interface the process control unit has access to INFI-NET. At the same time the NPM module communicates with the control modules via the Controlway.
The process control unit interface can support hardware redundancy. In a redundant configuration, there are two NIS modules and two NPM modules. One pair of modules is the primary. If the primary modules fail, the backup modules come on-line. Redundant data highway communication capability is a standard feature.
The NIS module is an I/O module that works in conjunction with the NPM module. This allows a node to communicate with any other node on the INFI-NET loop. The NIS module is a single printed circuit board that occupies one slot in the module mounting unit. The circuit board contains microprocessor based communication circuitry that enables it to interface with the NPM module. Two latching screws on the faceplate secure the NIS module to the module mounting unit. There are 16 LEDs on the faceplate that display error codes and event/error counts.
More Products
ICSTriplex | GE Fanuc | Foxboro | Yokogawa |
T8444 | IC695RMX128 | FCM10E | AAI143-S03/A4S00 |
T8100C | DS200PCCAG5ACB | P0972VA ATS | AAI543 |
T8833C | DS200LDCCH1 DS200LDCCH1ALA | P0903CW | AAI543-H00 |
T8121C | IC693BEM340 | FBM215 | AAI543-H00 S1 |
TC20902 | IS200TRLYH1BED | FBM201 P0914SQ | AAI543-H00/K4A00 |
T8841 | IS2020RKPSG3A | BO123HE | AAI543-H03 |
T83124C | DS200DDTBG2ABB | P0972VA | AAI543-S00 |
T8153C | IC752WFC555-EC | FBM237 P0914XS | AAI543-S00 S1 |
TC32301 | 531X123PCHACG1 | FBI10E | AAI543-S00/A4S00 |
T8201 | DS200TCQAG1BGE | FBM242 P0916TA | AAI543-S03/A4S00 |
Service
Warranty: 12 months.
Lead time: 1-3 working days.
Type of payment:T/T and Western Union.
Courier partners: DHL, UPS, TNT, FedEx .
Technical specification, manuals and data sheets: Available on request.
FAQ
Q) What is your advantage?
A)Competitive Price Fast Delivery Thoughtful service.
Q) What about payment?
A)T/T, Western Union.
Q) What is the warranty?
A)The Process Automation warranty is 12 months from the date of shipment.
Q) What is the price?
A) The target pricing is to be competitive with the 3 rd party surplus market. The pricing is subject to change, and the percentage as compared to new varies by product.