330101-00-18-10-02-00
Bently Nevada
T/T
1 year
Availability: | |
---|---|
Quantity: | |
Module: Part of the 3300 XL 8 mm Proximity Transducer System
Probe: 3300 XL 8 mm probe
Extension Cable: 3300 XL extension cable
Proximitor Sensor: 3300 XL Proximitor Sensor
Measures both static (position) and dynamic (vibration) values.
Suitable for vibration and position measurements on fluid-film bearing machines.
Supports Keyphasor reference and speed measurements.
Complies with API 670 Standard (4th Edition) for mechanical configuration, linear range, accuracy, and temperature stability.
Fully interchangeable components (probes, extension cables, and Proximitor sensors).
Backward-compatible with non-XL 3300 series 5 mm and 8 mm transducer system components.
High immunity to radio frequency interference (RFI).
CE mark approvals without special shielded conduit or metallic housings.
SpringLoc terminal strips for robust field wiring connections.
TipLoc molding method for robust probe tip bonding.
CableLoc design with 330 N (75 lbf) pull strength for secure attachment.
Nominal Probe DC Resistance: Refer to the datasheet for detailed specifications.
Power Supply Voltage: -24 VDC to -18 VDC
Output Resistance: 50 Ω
Sensitivity: 7.87 V/mm (200 mV/mil)
Frequency Response: 0 to 10 kHz (±3 dB)
Output Signal: Current-modulated signal proportional to the gap distance
Linear Range: 2 mm (80 mils)
Scale Factor: 8 mV/µm (200 mV/mil)
Probe Tip Material: PEEK (Polyether Ether Ketone)
Cable Material: Fluoropolymer
Probe Diameter: 8 mm
Extension Cable Length: 0.5 to 9 meters
Connector Type: ClickLoc connectors
Temperature Range:
Operating: -34°C to +177°C (-30°F to +350°F) for probe
Storage: -51°C to +177°C (-60°F to +350°F)
Humidity: 100% condensing, non-submersible
Vibration: 20 g peak, 10 Hz to 2 kHz
Shock: 150 g for 11 ms
API 670: Meets 4th Edition requirements
CE Mark: Approved
RFI Immunity: High immunity
Description
The 3500 Rack supplies an overall Rack OK relay in addition to any alarm relays in the rack. The Rack OK relay is in the TDI’s I/O module and is connected to the OK circuits of all modules in the rack. These OK circuits monitor the operating condition of each module.
Series Modules
330180-91-05
330180-50-05
990-05-70-01-01
991-25-70-01-01
990-05-50-02-01
330180-91-05
330780-90-05
330130-045-00-00
330130-080-00-00
125840-02
3500/53 133388-01
3500/22M 138607-01
3500/33 149986-01
330180-51-00
1900/65A 172323-01
1900/65A 167699-02
136719-01
330180-90-00
330180-91-05
330130-085-00-05
3500/94 145988-01
Module: Part of the 3300 XL 8 mm Proximity Transducer System
Probe: 3300 XL 8 mm probe
Extension Cable: 3300 XL extension cable
Proximitor Sensor: 3300 XL Proximitor Sensor
Measures both static (position) and dynamic (vibration) values.
Suitable for vibration and position measurements on fluid-film bearing machines.
Supports Keyphasor reference and speed measurements.
Complies with API 670 Standard (4th Edition) for mechanical configuration, linear range, accuracy, and temperature stability.
Fully interchangeable components (probes, extension cables, and Proximitor sensors).
Backward-compatible with non-XL 3300 series 5 mm and 8 mm transducer system components.
High immunity to radio frequency interference (RFI).
CE mark approvals without special shielded conduit or metallic housings.
SpringLoc terminal strips for robust field wiring connections.
TipLoc molding method for robust probe tip bonding.
CableLoc design with 330 N (75 lbf) pull strength for secure attachment.
Nominal Probe DC Resistance: Refer to the datasheet for detailed specifications.
Power Supply Voltage: -24 VDC to -18 VDC
Output Resistance: 50 Ω
Sensitivity: 7.87 V/mm (200 mV/mil)
Frequency Response: 0 to 10 kHz (±3 dB)
Output Signal: Current-modulated signal proportional to the gap distance
Linear Range: 2 mm (80 mils)
Scale Factor: 8 mV/µm (200 mV/mil)
Probe Tip Material: PEEK (Polyether Ether Ketone)
Cable Material: Fluoropolymer
Probe Diameter: 8 mm
Extension Cable Length: 0.5 to 9 meters
Connector Type: ClickLoc connectors
Temperature Range:
Operating: -34°C to +177°C (-30°F to +350°F) for probe
Storage: -51°C to +177°C (-60°F to +350°F)
Humidity: 100% condensing, non-submersible
Vibration: 20 g peak, 10 Hz to 2 kHz
Shock: 150 g for 11 ms
API 670: Meets 4th Edition requirements
CE Mark: Approved
RFI Immunity: High immunity
Description
The 3500 Rack supplies an overall Rack OK relay in addition to any alarm relays in the rack. The Rack OK relay is in the TDI’s I/O module and is connected to the OK circuits of all modules in the rack. These OK circuits monitor the operating condition of each module.
Series Modules
330180-91-05
330180-50-05
990-05-70-01-01
991-25-70-01-01
990-05-50-02-01
330180-91-05
330780-90-05
330130-045-00-00
330130-080-00-00
125840-02
3500/53 133388-01
3500/22M 138607-01
3500/33 149986-01
330180-51-00
1900/65A 172323-01
1900/65A 167699-02
136719-01
330180-90-00
330180-91-05
330130-085-00-05
3500/94 145988-01