3500/50-01-00 133442-01
Bently Nevada
T/T
1 year
Availability: | |
---|---|
Quantity: | |
The Bently Nevada 133442-01 is an I/O module with internal terminations. It is used with the 3500/40M, 3500/42M, and 3500/45 machinery protection systems.
The 133442-01 provides four input channels and four output channels. The input channels can be used for a variety of sensors, such as proximity probes, accelerometers, and velocity sensors. The output channels can be used to drive a variety of devices, such as alarms, relays, and solenoids.
Here are some of the technical specifications of the 133442-01:
Number of input channels: 4
Number of output channels: 4
Input signal type: 4-20 mA
Output signal type: 4-20 mA
Operating temperature: -40 to +85 degrees Celsius
Storage temperature: -55 to +125 degrees Celsius
Weight: 1.0 kg
Dimensions: 102 x 102 x 48 mm
Description
The 3500/22M Transient Data Interface (TDI) is the interface between the 3500 monitoring system and compatible software (System 1* Condition Monitoring and Diagnostic software and 3500 System Configuration software). The TDI combines the function of a 3500/20 Rack Interface Module (RIM) with the data collection capability of a communication processor such as TDXnet. The TDI resides in the slot adjacent to the power supplies of a 3500 rack. It interfaces with M series monitors (3500/40M, 3500/42M, etc.) to continuously collect steady state and transient dynamic (waveform) data and pass this data through an Ethernet link to the host software. Refer to the Compatibility section at the end of this document for more information. Static data capture capability is standard with the TDI. However, using an optional Channel Enabling Disk will allow the TDI to capture dynamic and high-resolution transient data as well. The TDI incorporates the communication processor function within the 3500 rack. Although the TDI provides certain functions common to the entire rack, it is not part of the critical monitoring path and has no effect on the proper, normal operation of the overall monitor system for automatic machinery protection. Every 3500 rack requires one TDI or RIM, which always occupies Slot 1 (next to the power supplies).
More Products
T8100C | F7131 | DS200PCCAG5ACB | P0972VA ATS |
T8833C | F7133 | DS200LDCCH1 DS200LDCCH1ALA | P0903CW |
T8121C | F7553 | IC693BEM340 | FBM215 |
TC20902 | F8621A | IS200TRLYH1BED | FBM201 P0914SQ |
T8841 | F8628X | IS2020RKPSG3A | BO123HE |
T83124C | F8641 | DS200DDTBG2ABB | P0972VA |
T8153C | F8650 | IC752WFC555-EC | FBM237 P0914XS |
TC32301 | F8650E | 531X123PCHACG1 | FBI10E |
T8201 | H7506 | DS200TCQAG1BGE | FBM242 P0916TA |
T8295 | F1DI1601 | DS3800NGDD1C1B | FBM207c |
T8801C | F2DO1602 | IC670PBI001-BE | FBM204 |
T8846C | F3AIO8/401 | IS200TNH1A | FBM219 P0916RH |
The Bently Nevada 133442-01 is an I/O module with internal terminations. It is used with the 3500/40M, 3500/42M, and 3500/45 machinery protection systems.
The 133442-01 provides four input channels and four output channels. The input channels can be used for a variety of sensors, such as proximity probes, accelerometers, and velocity sensors. The output channels can be used to drive a variety of devices, such as alarms, relays, and solenoids.
Here are some of the technical specifications of the 133442-01:
Number of input channels: 4
Number of output channels: 4
Input signal type: 4-20 mA
Output signal type: 4-20 mA
Operating temperature: -40 to +85 degrees Celsius
Storage temperature: -55 to +125 degrees Celsius
Weight: 1.0 kg
Dimensions: 102 x 102 x 48 mm
Description
The 3500/22M Transient Data Interface (TDI) is the interface between the 3500 monitoring system and compatible software (System 1* Condition Monitoring and Diagnostic software and 3500 System Configuration software). The TDI combines the function of a 3500/20 Rack Interface Module (RIM) with the data collection capability of a communication processor such as TDXnet. The TDI resides in the slot adjacent to the power supplies of a 3500 rack. It interfaces with M series monitors (3500/40M, 3500/42M, etc.) to continuously collect steady state and transient dynamic (waveform) data and pass this data through an Ethernet link to the host software. Refer to the Compatibility section at the end of this document for more information. Static data capture capability is standard with the TDI. However, using an optional Channel Enabling Disk will allow the TDI to capture dynamic and high-resolution transient data as well. The TDI incorporates the communication processor function within the 3500 rack. Although the TDI provides certain functions common to the entire rack, it is not part of the critical monitoring path and has no effect on the proper, normal operation of the overall monitor system for automatic machinery protection. Every 3500 rack requires one TDI or RIM, which always occupies Slot 1 (next to the power supplies).
More Products
T8100C | F7131 | DS200PCCAG5ACB | P0972VA ATS |
T8833C | F7133 | DS200LDCCH1 DS200LDCCH1ALA | P0903CW |
T8121C | F7553 | IC693BEM340 | FBM215 |
TC20902 | F8621A | IS200TRLYH1BED | FBM201 P0914SQ |
T8841 | F8628X | IS2020RKPSG3A | BO123HE |
T83124C | F8641 | DS200DDTBG2ABB | P0972VA |
T8153C | F8650 | IC752WFC555-EC | FBM237 P0914XS |
TC32301 | F8650E | 531X123PCHACG1 | FBI10E |
T8201 | H7506 | DS200TCQAG1BGE | FBM242 P0916TA |
T8295 | F1DI1601 | DS3800NGDD1C1B | FBM207c |
T8801C | F2DO1602 | IC670PBI001-BE | FBM204 |
T8846C | F3AIO8/401 | IS200TNH1A | FBM219 P0916RH |