- All
- Product Name
- Product Keyword
- Product Model
- Product Summary
- Product Description
- Multi Field Search
loading
991-01-XX-01-00
Bently Nevada
T/T
1 year
| Availability: | |
|---|---|
| Quantity: | |
Input:
Accepts one non-contacting 3300 NSv Proximity Probe and extension cable.
Power Requirements:
Voltage: +12 to +35 Vdc at the transmitter terminal.
Signal Output:
Current: 4 to 20 mA over the specified full-scale range in a 2-wire configuration.
Accuracy:
Within ±1.5% over the specified full-scale range (typical). Accuracy is based on the voltage measured across a 250 Ω loop resistance.
Maximum Loop Resistance:
1,000 Ω including cable at 35 Vdc.
Current Limiting:
23 mA typical.
Adjustments:
Non-interacting external zero and span adjustments.
Not OK/Signal Defeat:
Signal output will drop to less than 3.6 mA within 100 µs after a Not OK condition occurs. Signal output is restored within 0.1 seconds after the condition is resolved.
Proximitor Sensor Output:
Compatible with ungrounded, portable test equipment. Use the 122115-01 Test Adapter for signal isolation when using grounded, ac-powered test equipment.
Output impedance: Prox Out has a 10 kΩ output impedance calibrated for a 10 MΩ load.
Linear Range:
0.25 to 1.65 mm (10 to 65 mils) for Prox Out.
Suitable for 0.6-0-0.6 mm or 25-0-25 mils current loop linear ranges.
Incremental Scale Factor:
7.87 mV/µm (200 mV/mil) ±6.5% typical, including interchangeability errors measured in increments of 0.25 mm (10 mils) over the linear range using a flat 30 mm (1.2 inch) target.
Temperature Stability:
Incremental scale factor remains within ±10% of 7.87 mV/µm (200 mV/mil) from 0°C to +70°C (+32°F to +158°F).
Minimum Target Size:
9.5 mm (0.375 in) diameter.
Leadwire Length:
Proximitor Sensor Output (BNC connector), maximum cable distance is 3 meters (10 feet).
Hazardous Area Locations:
13 km (8 miles) maximum between transmitter and receiving device for signal output.
Transmitter Temperature:
Operating: -35°C to +85°C (-31°F to +185°F).
Storage: -51°C to +100°C (-60°F to +212°F).
Probe Temperature:
Operating: -52°C to +177°C (-62°F to +351°F).
Storage: -52°C to +177°C (-62°F to +351°F).
Humidity:
100% condensing, non-submerged, with protection of coaxial connectors.
Transducer Tip Material:
Polyphenylene sulfide (PPS).
Transducer Case Material:
AISI 303 or 304 Stainless Steel (SST).
Probe Cable:
75Ω coaxial, fluoroethylene propylene (FEP) insulated.
Cable Armor (optional):
Flexible AISI 302 SST with optional FEP outer jacket.
Tensile Strength:
222 N (50 lbf) from probe case to probe lead, maximum.
Transmitter Weight:
0.43 kg (0.9 lbm).
Total System Weight:
0.82 kg (1.8 lbm) typical.
Bently Nevada Main Products
| 330180-90-00 | 3500/92 136180-01 |
| 330180-91-05 | 3500/32M 149986-02 |
| 3500/94 145988-01 | 3500/40M 176449-01 |
| 3500/22M 146031-01 | 3500/25 149369-01 |
| 1900/65A 167699-02 | 3500/22 146031-01 |
| 1900/65A 172323-01 | 3500/94 147663-01 |
| 3500/42M 176449-02 | 3500/94 145988-01 |
| 21505-00-72-10-02 | 3500/25 149369-01 |
Strong PLC Parts Series:
ABB PLC
DCS 800xA System/S800 I/O System, ADCS 800xA System/S900 I/O Series, Advant OCS/800XA , H&B Freelance 2000 , BAILEY-INFI90/Bailey Net 90, DSQC Robot Parts, PLC cards and boards
Honeywell DCS
Experion PKS ( C200 , C300 ), FSC
Bently Nevada TSI
Bently Nevada 3500 Series Monitor system, Bently Nevada 3300 Series Monitor system
Modules/Chassis/I/O Module, Power Supply Module/Proximitor Sensor/ Programming Cable
Fanuc PLC
IC695, IC698, IC694, IC697, IC754, IC752 QuickPanel, IC660, IC600 Seriex Six, IC610, IC620 Series One, IC692 Series 90-20, IS200, IS215, DS200, DS3000/3800
Invensys Foxboro DCS
Foxboro I/A Series System Module.Foxboro CP /Foxboro FBM , Foxboro Termination Assembly Module, Foxboro Baseplate
InvensysTriconex DCS
Triconex Rack, Triconex Power Module, Processor Module, Input Module, Output Module, Tricon Communication Module TCM, Triconex Terminal Block, Triconex Cable
Yokogawa PLC
Yokogawa CENTUM CS 3000 R3/Yokogawa CPU Module/Power Supply Module/ I/O Module/Cards
More Products
| 51195156-300 | IS200JPDHG1AAA | DAI04 | 1C31132G01 |
| 51195155-100 | IS200SSCAH2AGD | DLM02 | 1C31129G03 |
| 51309218-125 | IS220PAICH2A | DI810 | 5X00119G01 |
| 51305890-175 | IS200STCIH2AED | DO810 | 1C31166G01 |
| 51305907-175 | IS215UCVEH2AE | CI854AK01 | 1C31169G02 |
| 51309223-175 | IS210AEPSG1A | IMMFP12 | 1C31203G01 |
| 51304477-100 | IS210AEAAH1B | IMDSM04 | 1C31204G01 |
| 51402573-150 | IS220PRTDH1A | IMFCS01 | 1C31205G01 |
| 51401642-150 | IS220PPRFH1B | NTAI06 | 1C31179G01 |
| 51401635-150 | IS220PDIAH1B | NTCL01 | 1C31181G01 |
| 51403165-400 | IS420UCSBH4A | INNIS21 | 1C31206G01 |
| 51401560-100 | IS200SPIDG1ABA | 3BHB002953R0108 | 5X00070G01 |
About us
Our company is a professional engaged in the large-scale system (distributed control system, programmable controller, redundant fault-tolerant control systems, robot control system, large servo control system is the central feeding system plastic molding auxiliary equipment and automation of whole plant planning) imported automation system such as spare parts, modules, sales and system integration of high-tech enterprises. The company is equipped with professional technicians to provide customers with better service.
Input:
Accepts one non-contacting 3300 NSv Proximity Probe and extension cable.
Power Requirements:
Voltage: +12 to +35 Vdc at the transmitter terminal.
Signal Output:
Current: 4 to 20 mA over the specified full-scale range in a 2-wire configuration.
Accuracy:
Within ±1.5% over the specified full-scale range (typical). Accuracy is based on the voltage measured across a 250 Ω loop resistance.
Maximum Loop Resistance:
1,000 Ω including cable at 35 Vdc.
Current Limiting:
23 mA typical.
Adjustments:
Non-interacting external zero and span adjustments.
Not OK/Signal Defeat:
Signal output will drop to less than 3.6 mA within 100 µs after a Not OK condition occurs. Signal output is restored within 0.1 seconds after the condition is resolved.
Proximitor Sensor Output:
Compatible with ungrounded, portable test equipment. Use the 122115-01 Test Adapter for signal isolation when using grounded, ac-powered test equipment.
Output impedance: Prox Out has a 10 kΩ output impedance calibrated for a 10 MΩ load.
Linear Range:
0.25 to 1.65 mm (10 to 65 mils) for Prox Out.
Suitable for 0.6-0-0.6 mm or 25-0-25 mils current loop linear ranges.
Incremental Scale Factor:
7.87 mV/µm (200 mV/mil) ±6.5% typical, including interchangeability errors measured in increments of 0.25 mm (10 mils) over the linear range using a flat 30 mm (1.2 inch) target.
Temperature Stability:
Incremental scale factor remains within ±10% of 7.87 mV/µm (200 mV/mil) from 0°C to +70°C (+32°F to +158°F).
Minimum Target Size:
9.5 mm (0.375 in) diameter.
Leadwire Length:
Proximitor Sensor Output (BNC connector), maximum cable distance is 3 meters (10 feet).
Hazardous Area Locations:
13 km (8 miles) maximum between transmitter and receiving device for signal output.
Transmitter Temperature:
Operating: -35°C to +85°C (-31°F to +185°F).
Storage: -51°C to +100°C (-60°F to +212°F).
Probe Temperature:
Operating: -52°C to +177°C (-62°F to +351°F).
Storage: -52°C to +177°C (-62°F to +351°F).
Humidity:
100% condensing, non-submerged, with protection of coaxial connectors.
Transducer Tip Material:
Polyphenylene sulfide (PPS).
Transducer Case Material:
AISI 303 or 304 Stainless Steel (SST).
Probe Cable:
75Ω coaxial, fluoroethylene propylene (FEP) insulated.
Cable Armor (optional):
Flexible AISI 302 SST with optional FEP outer jacket.
Tensile Strength:
222 N (50 lbf) from probe case to probe lead, maximum.
Transmitter Weight:
0.43 kg (0.9 lbm).
Total System Weight:
0.82 kg (1.8 lbm) typical.
Bently Nevada Main Products
| 330180-90-00 | 3500/92 136180-01 |
| 330180-91-05 | 3500/32M 149986-02 |
| 3500/94 145988-01 | 3500/40M 176449-01 |
| 3500/22M 146031-01 | 3500/25 149369-01 |
| 1900/65A 167699-02 | 3500/22 146031-01 |
| 1900/65A 172323-01 | 3500/94 147663-01 |
| 3500/42M 176449-02 | 3500/94 145988-01 |
| 21505-00-72-10-02 | 3500/25 149369-01 |
Strong PLC Parts Series:
ABB PLC
DCS 800xA System/S800 I/O System, ADCS 800xA System/S900 I/O Series, Advant OCS/800XA , H&B Freelance 2000 , BAILEY-INFI90/Bailey Net 90, DSQC Robot Parts, PLC cards and boards
Honeywell DCS
Experion PKS ( C200 , C300 ), FSC
Bently Nevada TSI
Bently Nevada 3500 Series Monitor system, Bently Nevada 3300 Series Monitor system
Modules/Chassis/I/O Module, Power Supply Module/Proximitor Sensor/ Programming Cable
Fanuc PLC
IC695, IC698, IC694, IC697, IC754, IC752 QuickPanel, IC660, IC600 Seriex Six, IC610, IC620 Series One, IC692 Series 90-20, IS200, IS215, DS200, DS3000/3800
Invensys Foxboro DCS
Foxboro I/A Series System Module.Foxboro CP /Foxboro FBM , Foxboro Termination Assembly Module, Foxboro Baseplate
InvensysTriconex DCS
Triconex Rack, Triconex Power Module, Processor Module, Input Module, Output Module, Tricon Communication Module TCM, Triconex Terminal Block, Triconex Cable
Yokogawa PLC
Yokogawa CENTUM CS 3000 R3/Yokogawa CPU Module/Power Supply Module/ I/O Module/Cards
More Products
| 51195156-300 | IS200JPDHG1AAA | DAI04 | 1C31132G01 |
| 51195155-100 | IS200SSCAH2AGD | DLM02 | 1C31129G03 |
| 51309218-125 | IS220PAICH2A | DI810 | 5X00119G01 |
| 51305890-175 | IS200STCIH2AED | DO810 | 1C31166G01 |
| 51305907-175 | IS215UCVEH2AE | CI854AK01 | 1C31169G02 |
| 51309223-175 | IS210AEPSG1A | IMMFP12 | 1C31203G01 |
| 51304477-100 | IS210AEAAH1B | IMDSM04 | 1C31204G01 |
| 51402573-150 | IS220PRTDH1A | IMFCS01 | 1C31205G01 |
| 51401642-150 | IS220PPRFH1B | NTAI06 | 1C31179G01 |
| 51401635-150 | IS220PDIAH1B | NTCL01 | 1C31181G01 |
| 51403165-400 | IS420UCSBH4A | INNIS21 | 1C31206G01 |
| 51401560-100 | IS200SPIDG1ABA | 3BHB002953R0108 | 5X00070G01 |
About us
Our company is a professional engaged in the large-scale system (distributed control system, programmable controller, redundant fault-tolerant control systems, robot control system, large servo control system is the central feeding system plastic molding auxiliary equipment and automation of whole plant planning) imported automation system such as spare parts, modules, sales and system integration of high-tech enterprises. The company is equipped with professional technicians to provide customers with better service.
