Electronic Modules WAGO 750-337/000-001 CANopen Fieldbus Coupler Module

The WAGO 750-337/000-001 is a CANopen fieldbus coupler that connects the WAGO-I/O-SYSTEM as a slave to the CANopen fieldbus. It is a compact and versatile module that can be used in a wide range of applications.

Here are some of the key technical features of the WAGO 750-337/000-001:

• CANopen communication: The module supports CANopen CiA 404 and CANopen CiA 414 as well as CANopen CiA 301 (old CANopen protocol)

• Modular design: The module can be used with up to 63 I/O modules from the WAGO-I/O-SYSTEM

• Automatic configuration: The module automatically detects all connected I/O modules and creates a local process image

• Support for analog and digital data: The module can transmit analog and digital data via PDOs and SDOs

• 24 Vdc power supply: The module has a 24 Vdc power supply that can be used to power the connected I/O modules

The WAGO 750-337/000-001 is a powerful and versatile fieldbus coupler that can be used in a wide range of applications. It is a popular choice for applications that require a reliable and easy-to-use CANopen fieldbus coupler.

Here are some of the typical applications for the WAGO 750-337/000-001:

• Building automation: The module can be used to connect sensors and actuators in building automation systems

• Industrial automation: The module can be used to connect I/O devices in industrial automation systems

• Process control: The module can be used to connect I/O devices in process control systems

FGU130B	NB2W90R-11	NP1AY02-MR
NB2W56R	CTHMIMOD-00	NP1AXH8VG-MR
FTU612A	NP1AXH8V-MR	NP1AXH4DG-MR
NC1X6406	FNC160A-C20	NR1TW-16T65DT
NP1F-MM1	NP1X1611-RI	NR1DY-16T05DT
NP1W1606T	NP1Y16T10P2	NR1SW-16T65DT

Description

IEC Standards testing procedures require that the mechanical durability test be carried out without current flowing in the main circuit, with the rated voltage applied to the coil and for at least as many on-off operation cycles as specified for the corresponding intermittent duty class as shown in the table on page 5. The mechanical life of the contactor is inversely proportional to the third or fourth power of the operating voltage. Therefore, if the control circuit voltage is 10% higher than the coil’s rated voltage, the mechanical durability will be reduced by half. An increase in control circuit voltage will harm the operating mechanism, core and shading coil. The results of the mechanical durability test for SC series contactors are given in the table below. The electrical durability test must be carried out for the number of operation cycles specified for the corresponding intermittent duty class shown in the table on page 5, and under the circuit conditions of the corresponding utilization category as defined in the table on page 4. Contact wear is caused by arcing that occurs between contacts when the current is interrupted. The amount of contact wear is directly proportional to approximately the second power of the interrupted current value. Therefore, when a contactor is used for inching or plugging operations, the expected service life of the contacts will be much less than if used for normal operations.

More Products

Fuji	Prosoft	Bently   Nevada	Schneider
NP1W1606T	MVI69L-MBS	1900/65A	490NRP25300
NP1F-MM1	MVI46-MBP	3500/65-01-01	140AII33010
FTU612A	MVI69-MCM	3500/42 138700-01	140XTS00200
FGU130B	MVI56E-GSC	330180-91-05	140CRP81100
FNC160A-C20	MVI69E-MBS	3500/50 133434-01	AS-B805-016
NR1SW-16T65DT	2150-AGA	3500/42 140471-01	170INT11003
NP1X1611-RI	PS69-DPM	125680-01	140DDM39000
NJ-JM	MVI71-ADM	330180-51-00	416NHM30032
NC1X6406	MVI69-MNET	136188-02	MC-4/11/03/400
NP1AXH4DG-MR	MVI56-HART	125388-01 125388-01H	140CPS51100