GE Fanuc IC697PWR710 55W Power Supply Module in stock

Key Features and Specifications:

• Manufacturer: GE Fanuc

• Product Number: IC697PWR710

• Product Type: Power Supply

• Input Specifications:

• 90 watts at full load

• 90 to 264 VAC

• 100 to 150 VDC

• 120/240 VAC

• 125 VDC

• Nominal Rated Voltage:

• Input Voltage Range:

• Input Power:

• Output Specifications:

• +5VDC up to 11 amps

• 56 watts

• Output Power:

• DC Output:

• Physical and Installation:

• Leftmost slot

• Location on Baseplates:

Applications and Benefits:

• Versatile Input Range: The wide input voltage range (both AC and DC) allows the power supply to be used in various industrial environments with different power sources.

• Reliable Output: Provides a stable +5VDC output at up to 11 amps, ensuring consistent power delivery to the PLC and connected modules.

• Compact Design: Occupies the leftmost slot on the baseplate, making it easy to integrate into existing systems without requiring additional space.

Description

The IC697PWR710 is a 90-70 Series 55 Watt Power Supply Module manufactured by GE Fanuc. The IC697PWR710 module is designed to operate from a 120 VAC or 264 VAC nominal line. The input voltage range of 90 to 264 VAC, 47 to 63 Hz will be accepted by the power supply. The power supply can also operate with a 125 VDC nominal line. There is an electronic overvoltage protection circuit included the power supply. If the 5 volt bus exceeds 6.2 volts, the circuit will lock the output. The power supply fuse will not open due to output external overvoltage, but the fuse can be opened if overvoltage resulted from an internal fault in the power supply. The fuse may be replaced with a 1 amp 250 volt 5x20 mm fuse.

The IC697PWR710 module is rack-mounted, and the unit plugs straight into a 48-pin connecter located in the leftmost slot in the rack. The power supply can be used either in a single rack application or as a power supply to a second rack if the total load is within the supply rating. There is a prewired cable available used for interconnection of the second rack. There are four terminals attached to the input terminal board. Two top terminals (L1 and N) are connections for input powers of 120/240 VAC or 125 VDC. The last two terminal connections are for overload device protection and ground. Connections for power input are designed for copper AWG wire, sizes #16. Terminals can operate with solid standard wires, but wires into any terminal should be the same type and size. For proper grounding, it is recommended that the ground terminal on the power supply be connected to the GND terminal located on the rack with copper AWG #12 wires.   

Products Of Other Brands

Quick Items

In stock

MOQ 1 Pcs

100% new factory sealed

Warranty: 12 months

Payment: T/T

Shipped within 1-2 days after payment

Shipment: DHL UPS FedEx, etc (Packed in brand new and original box)

About Us

Our company is a reliable supplier of modules, cards, boards, processors in China.   We believe that getting started is very difficult and then it gets better. So if you are worried, puzzled, please contact us and check freely. Because we understand it's just a requirement and policy of your company.