1756-IF16
Allen Bradley
T/T
12 Months
Availability: | |
---|---|
Quantity: | |
Environmental Specifications:
Temperature, Operating
IEC 60068-2-1 (Test Ae, Operating Cold)
IEC 60068-2-2 (Test Be, Operating Dry Heat)
IEC 60068-2-14 (Test Nb, Operating Variation of Temperature)
0 °C < Ta < +60 °C (+32 °F < Ta < +140 °F)
Temperature, Surrounding Air, Max
60 °C (140 °F)
Temperature, Nonoperating
IEC 60068-2-1 (Test Ab, Unpackaged Nonoperating Cold)
IEC 60068-2-2 (Test Bb, Unpackaged Nonoperating Dry Heat)
IEC 60068-2-14 (Test Na, Unpackaged Nonoperating Thermal Shock)
-40…+85 °C (-40…+185 °F)
Relative Humidity
IEC 60068-2-30 (Test Db, Unpackaged Damp Heat)
5…95% noncondensing
Vibration
IEC 60068-2-6 (Test Fc, Operating)
2 g @ 10…500 Hz
Shock, Operating
IEC 60068-2-27 (Test Ea, Unpackaged Shock)
30 g
Shock, Nonoperating
IEC 60068-2-27 (Test Ea, Unpackaged Shock)
50 g (30 g)
Emissions IEC 61000-6-4
ESD Immunity
IEC 61000-4-2
6 kV contact discharges
8 kV air discharges
Radiated RF Immunity
IEC 61000-4-3
10V/m with 1 kHz sine wave 80% AM from 80…2000 MHz
10V/m with 200 Hz 50% Pulse 100% AM @ 900 MHz
10V/m with 200 Hz 50% Pulse 100% AM @ 1890 MHz
3V/m with 1 kHz sine wave 80% AM from 2000…2700 MHz
EFT/B Immunity
IEC 61000-4-4
±2 kV at 5 kHz on signal ports
Surge Transient Immunity
IEC 61000-4-5
±2 kV line-earth (CM) on shielded ports
Conducted RF Immunity
IEC 61000-4-6
10V rms with 1 kHz sine wave 80% AM from 150 kHz…80 MHz
1756 ControlLogix I/O Specifications
Analog I/O Operation in the ControlLogix System Introduction I/O modules are interfaces between the controller and the field devices that comprise the ControlLogix system. Analog signals, which are continuous, are converted by the module and used by the controller to mandate field-device results. This chapter describes how analog I/O modules operate within the ControlLogix system
ControlLogix Analog I/O Modules Catalog Numbers 1756-IF16, 1756-IF6CIS, 1756-IF6I, 1756-IF8, 1756-IR6I, 1756-IT6I, 1756-IT6I2, 1756-OF4, 1756-OF6CI, 1756-OF6VI, 1756-OF8
IN STOCK
2711-T10C15 | 1756-OW16I | 1756-IB16 |
2711-T10C20 | 1756-IB32 | 2711P-RN6 |
1756-CNBR | 1756-PA75 | 2711P-RP1 |
1747-L541 | 1747-L541 | 2711P-RP2A |
1757-SRM | 1756-OBI6E | 1771-A1B |
2711-NC13 | 1756-OB16I | 1756-DHRIO |
1756-EN2T | 1756-IB16I | 1756-OF8H |
1746-NI4 | 1746-OW8/A | 1756-TBCH |
1756-BA2 | 1746-OB16/D | 1747-SN/B |
1771-IMD/B | 1756-OF4/A | 1746-NI4/A |
1771-OBD/C | 1756-IF16 | 1747-BA |
1771-P6R C | 1746-A7/B | 1794-OB16 |
1771-P6S B | 1756-EN2T | 1794-IB16 |
1785-BCM/C | 1746-A13 | 1756-OB16E |
Environmental Specifications:
Temperature, Operating
IEC 60068-2-1 (Test Ae, Operating Cold)
IEC 60068-2-2 (Test Be, Operating Dry Heat)
IEC 60068-2-14 (Test Nb, Operating Variation of Temperature)
0 °C < Ta < +60 °C (+32 °F < Ta < +140 °F)
Temperature, Surrounding Air, Max
60 °C (140 °F)
Temperature, Nonoperating
IEC 60068-2-1 (Test Ab, Unpackaged Nonoperating Cold)
IEC 60068-2-2 (Test Bb, Unpackaged Nonoperating Dry Heat)
IEC 60068-2-14 (Test Na, Unpackaged Nonoperating Thermal Shock)
-40…+85 °C (-40…+185 °F)
Relative Humidity
IEC 60068-2-30 (Test Db, Unpackaged Damp Heat)
5…95% noncondensing
Vibration
IEC 60068-2-6 (Test Fc, Operating)
2 g @ 10…500 Hz
Shock, Operating
IEC 60068-2-27 (Test Ea, Unpackaged Shock)
30 g
Shock, Nonoperating
IEC 60068-2-27 (Test Ea, Unpackaged Shock)
50 g (30 g)
Emissions IEC 61000-6-4
ESD Immunity
IEC 61000-4-2
6 kV contact discharges
8 kV air discharges
Radiated RF Immunity
IEC 61000-4-3
10V/m with 1 kHz sine wave 80% AM from 80…2000 MHz
10V/m with 200 Hz 50% Pulse 100% AM @ 900 MHz
10V/m with 200 Hz 50% Pulse 100% AM @ 1890 MHz
3V/m with 1 kHz sine wave 80% AM from 2000…2700 MHz
EFT/B Immunity
IEC 61000-4-4
±2 kV at 5 kHz on signal ports
Surge Transient Immunity
IEC 61000-4-5
±2 kV line-earth (CM) on shielded ports
Conducted RF Immunity
IEC 61000-4-6
10V rms with 1 kHz sine wave 80% AM from 150 kHz…80 MHz
1756 ControlLogix I/O Specifications
Analog I/O Operation in the ControlLogix System Introduction I/O modules are interfaces between the controller and the field devices that comprise the ControlLogix system. Analog signals, which are continuous, are converted by the module and used by the controller to mandate field-device results. This chapter describes how analog I/O modules operate within the ControlLogix system
ControlLogix Analog I/O Modules Catalog Numbers 1756-IF16, 1756-IF6CIS, 1756-IF6I, 1756-IF8, 1756-IR6I, 1756-IT6I, 1756-IT6I2, 1756-OF4, 1756-OF6CI, 1756-OF6VI, 1756-OF8
IN STOCK
2711-T10C15 | 1756-OW16I | 1756-IB16 |
2711-T10C20 | 1756-IB32 | 2711P-RN6 |
1756-CNBR | 1756-PA75 | 2711P-RP1 |
1747-L541 | 1747-L541 | 2711P-RP2A |
1757-SRM | 1756-OBI6E | 1771-A1B |
2711-NC13 | 1756-OB16I | 1756-DHRIO |
1756-EN2T | 1756-IB16I | 1756-OF8H |
1746-NI4 | 1746-OW8/A | 1756-TBCH |
1756-BA2 | 1746-OB16/D | 1747-SN/B |
1771-IMD/B | 1756-OF4/A | 1746-NI4/A |
1771-OBD/C | 1756-IF16 | 1747-BA |
1771-P6R C | 1746-A7/B | 1794-OB16 |
1771-P6S B | 1756-EN2T | 1794-IB16 |
1785-BCM/C | 1746-A13 | 1756-OB16E |